fine tuning

Kinematik.scad

@@ -3,7 +3,7 @@ $fn=128;
 
 module coupler_holder(){
 	difference(){
-		translate([0,-2,-0.2])cube([3.5,4,2.5]);
+		translate([0,-2.3,-0.2])cube([3.5,4.6,2.5]); // evtl. können die Außenwände wieder dünner werden
 		translate([-1.0,-2.6/2,0.3])cube([5,2.6,1.5]);
 		translate([2.5,-5/2,0.65])cube([2,5,0.7]);
 		translate([1.3,-5/2,0.8])cube([2,5,0.4]);
@@ -41,7 +41,7 @@ module fixed_part(){
 		translate([3,0,0])cylinder(d=2,h=10,center=true);
 		translate([3,0,-1])cylinder(d=3,h=10);
 		
-		translate([0,0,1.5])rotate([180,0,0]) deckel(0.3);
+		translate([0,0,1.5])rotate([180,0,0]) deckel(0.6);
 	}
 	
 }
@@ -58,23 +58,23 @@ module moving_part(){
 			translate([-1,-4,0])cylinder(d=1,h=0.8,center=true);
 			translate([-1, 4,0])cylinder(d=1,h=0.8,center=true);
 		}
-		translate([-19,0,-0.6])cylinder(d=1.6,h=1.8,center=true);
-		translate([-19,0,-1.5])sphere(d=1.6);
-		translate([-20,0,-3.8]) cylinder(d=1.6,h=5.3,center=true);
-		hull(){
-			translate([-20,0,-6.5]) cylinder(d=1.6,h=0.1,center=true);
-			translate([-18,0,0]) cylinder(d=1.6,h=0.1,center=true);
-		}
+		translate([-18.6,0,-0.6])cylinder(d=1.6,h=1.8,center=true);
+		translate([-18.6,0,-1.5])sphere(d=1.6);
 		difference(){
 			union(){
+				translate([-20,0,-3.8]) cylinder(d=1.6,h=5.1,center=true);
+				hull(){
+					translate([-20,0,-6.5]) cylinder(d=2,h=0.1,center=true);
+					translate([-18,0,0]) cylinder(d=2,h=0.1,center=true);
+				}
 				translate([-21.5,0,-6.6])rotate([0,0,180])coupler_holder();
 				hull(){
-					translate([-22.5,-2,-6.6])cube([1,4,2.2]);
-					translate([-20,0,-5.1]) cylinder(d=1.6,h=3,center=true);
+					translate([-22.5,-2,-6.8])cube([1,4,2.5]);
+					translate([-20,0,-5.1]) cylinder(d=2,h=3,center=true);
 				}
 				
 			}
-			translate([-21.5,0,-6.6])rotate([0,0,180])translate([0,-2.6/2,0.3])cube([5,2.6,1.5]);
+			translate([-21.5,0,-6.6])rotate([0,0,180])translate([-0.5,-2.6/2,0.3])cube([5,2.6,1.5]);
 		}
 		translate([-13,-7.7,0])cylinder(d=1,h=0.8,center=true);
 		hull(){
@@ -106,3 +106,4 @@ module kinematik(angle){
 
 *kinematik();
 moving_part();
+*fixed_part();