Katzenklappe/catflap.scad

/* parameters */
door_thick = 50;
flap_w = 150;
flap_h = 150;
flap_thick = 6;
bearing_inner_dia = 5;
bearing_outer_dia = 20;
bearing_h = 5;
gap = 1;

/* constants */
$fn = 32;
rx = [90,0,0]; // rotate 90 deg around x
ry = [0,90,0]; // rotate 90 deg around y
silver = [0.7,0.7,0.7];
plexy = [0.4,0.6,1,0.6];
red = [1,0,0];

/* variable */
raise_stopper = 0;
angle = 0;


module door(){
    difference(){
        translate([900,door_thick,0]/-2)cube([900,door_thick,2000]);
        translate([-flap_w/2-gap,(door_thick+1)/-2,-1])cube([2*gap+flap_w,door_thick+1,flap_h+1]);
    }
}

module stopper_guide(){
    translate([-30,flap_thick/2,bearing_outer_dia])
        difference(){
            cube([60,flap_thick,20-bearing_outer_dia]);
            translate([8,0,5])rotate(rx) cylinder(d=4,h=40,center=true);
            translate([52,0,5])rotate(rx) cylinder(d=4,h=40,center=true);
        }
}

module flap(){
    color(plexy) {
        difference(){
            translate([flap_w,flap_thick,0]/-2)
                cube([flap_w,flap_thick,flap_h]);
            translate([2*(10+gap)+bearing_h,bearing_outer_dia+gap,2]/-2)
                cube([bearing_h+2*(gap+10),bearing_outer_dia+gap,2*bearing_h+20+gap+1]);
        }
        translate([0,0,flap_h])
            rotate(ry)
                cylinder(d=flap_thick,h=flap_w,center=true);
        stopper_guide();
        rotate([0,0,180])stopper_guide();

    }
    translate([0,0,raise_stopper])stopper();
}

module bearing(){
    color(silver)
        rotate(ry)
            difference(){
                cylinder(d=bearing_outer_dia,h=bearing_h,center=true);
                cylinder(d=bearing_inner_dia,h=bearing_h+2,center=true);
            }
}

module bearing_case(){
    rotate(ry)
        cylinder(d=bearing_inner_dia-gap,h=bearing_h+gap);
    translate([(bearing_h+gap)/2,0,0])
        rotate(ry)
            cylinder(d=flap_thick,h=10);
    translate([bearing_h+1,-flap_thick,0]/2)
        cube([10,flap_thick,bearing_h+20]);
    translate([0,flap_thick/-2,bearing_h+1])
        cube([bearing_h,flap_thick,19]);
    translate([0,flap_thick/-2-2,20])
        #cube([(20+bearing_h+gap)/2,flap_thick+4,5]);
}

module stopper(){
    color(red){
        bearing_case();
        rotate([0,0,180]) bearing_case();
    }
    bearing();
}

module frame(){
    difference(){
        translate([flap_w+20,0,20]/-2)
            cube([flap_w+20,door_thick,flap_h+20]);
        translate([flap_w+2*gap,1,gap]/-2)
            cube([flap_w+2*gap,door_thick+1,flap_h+2*gap]);
        translate([bearing_h+2*gap,bearing_outer_dia-door_thick,bearing_outer_dia+2]/-2)
            cube([bearing_h+2*gap,bearing_outer_dia,2+bearing_outer_dia/2]);
    }
}

*door();
translate([0,door_thick/-2,flap_h]) frame();
translate([0,0,flap_h*2])
    rotate([angle,0,0])
        translate([0,0,-flap_h])
            flap();